Our blast media product line is manufactured for use in blast pots and cabinets.

AcryBlast™ Type V Blast Media, UreBlast™ Type III Blast Media, and MelBlast™ Type II Blast Media made from 100% domestic compression molded or cast sources is commonly used to strip and debur ferrous and non-ferrous substrates. Typical applications are the removal of top coat, base coat and primer coat from aircraft parts, military parts, marine equipment, automotive parts, consumer and industrial parts with minimal impact to the surface of the metal or plastic substrate. In addition, RMA blast media can be used in apparel and construction applications. Plastic blast media does not contain silica and there is no potential of silicosis development with use by applicators. Unlike other inorganic media, plastic media generates minimal dust and can be reused multiple times. Conforms to MIL-P-85891 (A), UK Def Spec 80-194, and Rolls Royce CSS200/227. Made in U.S.A. from domestic sources.

Benefits

• The hardest quality within its class

• Low dusting

• Minimal damage to substrate

• Recycle-friendly

• Color is clear to white

• Low odor sensitivity

• Highly efficient and non-abrasive

AcryBlast™ Type V Blast Media

AcryBlast™ Type V Blast Media is made from virgin cast PMMA and is commonly used to strip aluminum and fiberglass. Typical applications include the removal of top coat, base coat and primer coat from aircraft parts, military parts, marine equipment, automotive parts, consumer and industrial parts, all while maintaining minimal impact to the surface of the metal or plastic substrate. Unlike other inorganic media, acrylic media generates minimal dust and can be reused multiple times.

Our Acryblast product conforms to MIL-P-85891 (A), UK Def Spec 80-194, and Rolls Royce CSS200/227, and it is made in U.S.A. from domestic sources.

 

Benefits to using our Acryblast™ product includes:

• Harder than typical molded PMMA

• Low-dusting

• Minimal damage to substrate while using product

• Recycle-friendly

• Color is clear to white

• Low odor sensitivity

• Highly efficient and non-abrasive

 

Physical Properties

• Substrate thickness is 120 mils (nominal)

• Tear Strength of 200 lbs. x 200 lbs

• Puncture Resistant to 96 lbs.

• Shore a Durometer of 85

• Hydrostatic Resistance of 400 PSI

• Available in rollout 30″ and 60″x60′; Peel-N-Stick 1’x20′ and 8″x18″

• Available in White Sand, Black or Safety Yellow

MelBlast™ Plastic Abrasive Media

MelBlast™ is a plastic abrasive blasting media designed for fast stripping and deflashing. It offers multiple reusability. The inherent nature of the plastic produces far less dust than walnut shells or glass bead allowing for a clean, easily visible work atmosphere. This product is great for sensitive surfaces and will prolong the life of expensive molds, tools, and parts. Additional applications include deburring and deflashing of aluminum, zinc, and magnesium parts without damaging part surfaces or altering critical tolerances. This product can also be used for wet deflashing of resistors, transistors, diodes, and integrated circuits. MelBlast™ is non-toxic and eliminates silicosis workplace exposure. It can be used in air and wheel-blast equipment without the need to purchase new equipment. This product conforms to MIL-P-8589 (A), Rolls Royce CSS200/227 and is sourced and produced in the USA.

 

Benefits to using our MelBlast™ product includes:

• Non-toxic, no dust, and silica free

• Out performs walnut shells and glass bead

• Does not warp or abrade sensitive surfaces

 

Product applications include:

• Depainting aircraft components, brakes, wheels, landing gear, engines, etc

• Cleaning aluminum and steel molds in the rubber and plastics industry

• Stripping powder coated parts

• Depainting automobile bodies, boat surfaces and vacuum-metallized parts

• Deburring machined parts

• Deflashing electronic components and plastic molded pieces

 

Physical Properties

Hardness: Barcol 64-72; MOHS 4.0

Specific Gravity: 1.47 – 1.52 g/cc

Max Operating Temp: 150˚ C

Chemical Nature: Insert

Available for Meshes for Pulverizing

  1. 10/14 Mesh – 0.14 – 2.00 mm
  2. 10/16 Mesh – 0.12 – 2.00 mm
  3. 10/35 Mesh – 0.50 – 2.00 mm
  4. 12/20 Mesh – 0.85 – 1.68 mm
  5. 14/20 Mesh – 0.85 – 1.40 mm
  6. 16/20 Mesh – 0.85 – 1.20 mm
  7. 20/30 Mesh – 0.56 – 0.85 mm
  8. 30/40 Mesh – 0.42 – 0.56 mm
  9. 30/50 Mesh – 0.29 – 0.56 mm
  10. 40/60 Mesh – 0.25 – 0.42 mm
  11. 60/100 Mesh – 0.15 – 0.25 mm

*nominal particle sizes

Packaging Types: Drums, 50, 100, 250 lbs; Supersacks, 1500 lbs; Gayloards, 1500 lb.

NOTE: All sizes and weights are nominal. Product specifications are minimum values. Actual results may vary

UreBlast™ Plastic Abrasive Media

A plastic abrasive blasting media designed for fast stripping and deflashing. It offers multiple reusability. The inherent nature of the plastic produces far less dust than walnut shells or glass bead allowing for a clean, easily visible work at-mosphere. This product is great for sensitive surfaces and will prolong the life of expensive molds, tools, and parts. Additional applications include deburring and deflashing of aluminum, zinc, and magnesium parts without damaging part surfaces or altering critical tolerances. is non-toxic and eliminates silicosis workplace exposure. It can be used in air and wheel-blast equipment without the need to purchase new equipment.

 

Benefits to using our UreBlast™ product includes:

• Non-toxic, no dust, and silica free

• Out performs walnut shells and glass bead

• Does not warp or abrade sensitive surfaces

 

Product applications include:

• Depainting aircraft components, brakes, wheels, landing gear, engines, etc

• Cleaning aluminum and steel molds in the rubber and plastics industry

• Stripping powder coated parts

• Depainting automobile bodies, boat surfaces and vacuum-metallized parts

• Deburring machined parts

 

Physical Properties

Hardness: Barcol 54-63; MOHS 3.5

Specific Gravity: 1.47 – 1.52 g/cc

Max Operating Temp: 150˚ C

Chemical Nature: Insert

Available for Meshes for Pulverizing

  1. 10/14 Mesh – 0.14 – 2.00 mm
  2. 10/16 Mesh – 0.12 – 2.00 mm
  3. 10/35 Mesh – 0.50 – 2.00 mm
  4. 12/20 Mesh – 0.85 – 1.68 mm
  5. 14/20 Mesh – 0.85 – 1.40 mm
  6. 16/20 Mesh – 0.85 – 1.20 mm
  7. 20/30 Mesh – 0.56 – 0.85 mm
  8. 30/40 Mesh – 0.42 – 0.56 mm
  9. 30/50 Mesh – 0.29 – 0.56 mm
  10. 40/60 Mesh – 0.25 – 0.42 mm
  11. 60/100 Mesh – 0.15 – 0.25 mm

*nominal particle sizes

Packaging Types: Drums, 50, 100, 250 lbs; Supersacks, 1500 lbs; Gayloards, 1500 lb.

NOTE: All sizes and weights are nominal. Product specifications are minimum values. Actual results may vary

For more information on any of our Plastic Blast Media products and their use, email us at info@epttech.com or click here to submit our contact form, or you can purchase right from our online store today.

Call us today at 908-558-0011 for more information on our Plastic Blast Media products.

Back to Top